The dual-arm small stone slab stacking machine engineered by Ledrobit is a specialized automated handling system designed to connect high-speed cutting lines with downstream sorting and palletizing zones. Equipped with independent suction-cup and mechanical clamp arms, this dual-arm small stone slab stacking machine processes slab thicknesses ranging from 20 to 100 mm.
Dual Gripping Arm Architecture
The machine has a suction-cup arm and a clamp arm. The suction-cup arm handles thin slabs under 50 mm thick, while the clamp arm handles slabs over 50 mm thick. Selecting the arm to match the slab thickness covers a working range of 20–100 mm.
The machine transfers full layers measuring 1200 × 800 mm. The minimum single slab size is 100 × 100 mm.
Layer-Based Material Transfer
The machine transfers cut slabs by the layer for stacking small-format stone products. A belt conveyor frame receives and conveys the slabs, helping connect the stacker with the cutting machine and downstream processes.
Motion Control and Operational Timing
Servo motors provide the main drive, with positioning accuracy up to 0.2 mm. Each cycle takes approximately 30 seconds. Actual cycle time depends on slab dimensions, the selected gripping method and the production line layout.
Hardware Specifications Matrix
Item
Specification
Machine type
Dual-arm small stone slab stacking machine
Minimum single slab size
100 × 100 mm
Slab thickness
20–100 mm
Suction-cup arm
Slabs under 50 mm thick
Clamp arm
Slabs over 50 mm thick
Full-layer size
1200 × 800 mm
Positioning accuracy
Up to 0.2 mm
Cycle time
Approx. 30 seconds per cycle
Main drive
Servo motors
Conveyor
Belt conveyor frame
Machine dimensions
6000 × 2300 × 2600 mm
With two arms assigned to different slab thicknesses, the machine transfers and stacks full layers of stone slabs. It reduces manual stacking work and supports continuous operation on stone slab cutting lines. Contact us to discuss an automatic stacking solution for your slab sizes and production line layout.
Frequently Asked Questions
How does the unit switch between vacuum suction and mechanical clamping?
The integrated PLC control system automatically selects the appropriate gripping arm based on pre-programmed slab thickness parameters: vacuum suction cups engage for thin pieces under 50 mm, while heavy mechanical clamps activate for workpieces over 50 mm.
What is the maximum layer weight capacity during full-layer transfers?
The system is engineered to handle full-layer arrangements up to 1200 × 800 mm within the 20–100 mm thickness threshold, utilizing high-torque servo drives to maintain stable movement under full load.
How does the belt conveyor integrate with upstream multi-blade saws?
The heavy-duty belt conveyor frame receives cut tiles directly from the saw outfeed table, synchronizing transfer speed to maintain a continuous, unhindered material flow into the stacking gantry.
Can the mechanical positioning parameters be calibrated for custom tile sizes?
Yes, operators can easily adjust gripping boundaries and travel limits via the touch-screen control interface to accommodate small-format stone pieces down to the 100 × 100 mm minimum dimension limit.
What factory floor space must be allocated for proper mechanical installation?
Plant engineers must reserve an unobstructed floor layout measuring at least 6000 × 2300 mm, alongside stable 3-phase electrical drops to power the servo drives and conveyor framework safely.
Partner with Ledrobit for Factory Automation
Ledrobit provides robust material handling and slab processing equipment designed to optimize production efficiency for stone manufacturers worldwide. Contact our technical team today to evaluate your factory layout and slab dimensions for a customized automation layout.